CONTACT US POLICIES HOME
esulation, The Silver Stuff that keeps your home in the shade.
About Us Specifications Installations Testimonials
 
Welcome to esulation
esulation products
project photos
join our mailing list
 
Lower Energy Cost With esolution Radiant Barrier
Tell me how!
 
esulation, LLC
Slidell, Louisiana (LA) 70458
Phone: 985-726-5057
Email
 
Solar Powered Roof Vents

View Larger Image

SDF-20SF



SDF-20SF
(Self Flashed Base)
Product Details
SDF-20SF (Self Flashed Base) is designed for sloped low profile roof installations such as composite shingle. Minimum slope should be greater than 2:12 and maximum slope should be less than 6:12. (Use a curb mount base if the slope is less or greater than these slope ratios.)

The self flashed base is designed to slide under an existing roof. The based is attached to the roof decking with either roofing nails or screws. Care should be taken to waterproof the based to the roof decking and roofing materials. Use the highest quality roofing silicon. Always determine the amount of run off water at the head of the base. If the location of the fan is an area where there may be an excessive amount of run-off water, then use a curb-mount base.

MAXIMUM OUTSIDE CURB DIMENSION SHOULD BE NO LARGER THAN 16" X 19-1/4" TO ALLOW FOR PROPER FLASHING. IF MORE CLEARANCE IS NEEDED REDUCE CURB SIZE ACCORDINGLY.

CIRCULAR OPENING AT BASE--13-3/8"

www.solardynamicsinc.com

Return to the Previous Page

 

ABOUT US | SPECIFICATIONS | INSTALLATIONS | TESTIMONIALS | POLICIES | CONTACT US | PRODUCTS | HOME

©Copyright 1996-2017,esulation, LLC.  esulation is a trademark of esulation, LLC for insulation. This website created and maintained by iNET image, Inc. All rights reserved. Information subject to change without notice.
Powered by iNET RealTime